The cart is empty
DISPLAY OC ANT+ LEV
DISPLAY OC ANT+ LEV
The OC (Orbea Components) ANT+ LEV display is designed to be used with Orbea ebikes equipped with the MAHLE Ebikemotion® X35 system. The head unit pairs to the system via ANT+ LEV and allows for the visualization of the system´s information, while also enabling the rider to change between assist levels from the unit itself. The system´s most relevant information can thus be accessed without using the MAHLE Ebikemotion® mobile app.
The use of the MAHLE Ebikemotion® mobile app to record an activity, navigation and other functions is still possible while the system is connected via ANT+ to the OC display. Both connections may be used at the same time, allowing the rider to enjoy all the functionalities and data visualization without having to mount the smartphone on the handlebar during the activity.
Other ANT+ sensors can also be connected to the OC ANT+ head unit for data visualization while riding (cadence, speed, heart rate, etc).
The OC ANT+ LEV display can be used on ebikes from other brands equipped with an ANT+ ready MAHLE Ebikemotion® X35 system.
X35 SYSTEM DATA VISIBLE ON THE OC ANT+ LEV DISPLAY
-X35 battery level.
-Total system odometry.
-Current assist level.
The OC ANT+ LEV display unit also allows for the assist levels to be changed from the unit itself.
X35 SYSTEM COMPATIBLE VERSIONS.
The OC ANT+ LEV display can only be paired to Orbea ebikes that are equipped with an ANT+ version of the X35 system.
All X35 equipped Orbea ebikes from MY2020 onwards have ANT+ LEV connectivity from the factory. If your bicycle belongs to the 2020 or following ranges, the OC ANT+ LEV display can be connected without any updates to your system. If in doubt of what range your ebike belongs to, consult with us or with your Orbea distributor.
COMPATIBILITY WITH RANGES PREVIOUS TO MY2020
Some iterations of the MAHLE Ebikemotion® X35 system can be updated to gain ANT+ LEV connectivity with the use of an ANT+ LEV device. Depending on the specific model, and thus on the system´s configuration on a given bicycle, the device needed can vary:
-ANT+ LEV DONGLE: For Orbea ebikes that do not use the Iwoc Trio handlebar remote.
The ANT+ LEV dongle is installed within the bicycle´s top tube, and connected to the Iwoc One remote and the internal battery.
The compatible models with this device are Orbea Gain M and Gain D with drop road handlebars.
-IWOC TRIO+ REMOTE: For Orbea ebikes that use the Iwoc Trio handlebar remote.
The Iwoc Trio handlebar remote must be replaced with the new Iwoc Trio+. The Trio+ provides the system with ANT+ LEv connectivity.
The compatible models with this device are Orbea Gain F (Urban), Optima E and EMX24.
Not all versions of the MAHLE Ebikemotion® X35 system can be updated to gain ANT+ LEV connectivity by using the ANT+ LEV dongle or the Iwoc Trio+ remote.
Only versions of the system that use Cusmade C1206 round connectors can be updated by installing these components. Versions of the X35 system which use Hirose DF63 square connectors are not compatible with the ANT+ LEV dongle or the Iwoc Trio+ remote.
To find out what type of connectors the X35 system on your Orbea ebike uses, remove the plastic cover on the underside of the bottom bracket area and locate the cable that connects the internal battery to the charging point. If the connector between these two cables is a round Cusmade C1206, the system is compatible with the installation of the ANT+ LEV dongle or the Iwoc Trio+ remote. If the connector is a square Hirose DF63, the system cannot be updated to gain ANT+ LEV connectivity without replacing the complete electric system (internal battery, PASS sensor, charging point and remotes).
If in doubt about what version of the X35 system is installed on your bicycle, contact Orbea or your distributor.
Consult the OC ANT+ LEV display user manual from our website.
We reserve the right to make changes to the product information contained on this site at any time without notice, including with respect to equipment, specifications, models, colors, and materials.