The cart is empty
Your new Orbea is closer than you think! Find it
Asymmetric rims, angled spoke holes, and reinforced spoke beds allow us to remove material where it is not needed and reduce unnecessary strain in the wheel, maximizing rigidity without adding excess weight.
Each wheel has a different job to do and experiences different forces. OQUO wheels use front and rear specific designs, that means considering rim profiles, spokes and build specifications carefully to maximise performance. It is more work but the benifits are clear.
On tubeless wheels, punctures happen when the tire is pinched between an external object and the edge of the rim. Increasing the width of the rim profile in these points greatly reduces the likelihood of these punctures.
Asymmetric rims allow us to make a more triangular shape with the spokes from each side of the rim, balancing the spoke lengths and tensions. This means each spoke takes an equal amount of strain. In short, asymmetric rims mean fewer spoke sizes, more balanced tensions, and stronger, more reliable wheels.
Matching the angle of the spoke hole to the angle that the spoke leaves the rim at means that we can greatly reduce the stress at the spoke head. Implementing this technology requires added design and manufacturing work but the result is a far more reliable wheel with less chance of breaking spokes.
There is more stress on a rim where the spokes exert tension. Reinforcing these areas increases the reliability of the rim without adding excessive weight.
In our reliability testing j-bend spokes show a significant increase in fatigue resistance, meaning a wheel which stays true and strong for longer.
Our secure nipple lock ensures that your spokes stay tensioned just as they were when they left our factory. This in turn means that your wheel stays stronger for longer.
Hookless rims have straight sidewalls, rather than a hooked design. The main advantage is that they are lighter however with our Wide Bead design we have also measured a significant improvement in impact resistance.
DT240 S CL
F 110/15mm, R 148/12mm
Shimano Micro Spline / Sram XD MTB
24 / 28
Sapim CX-Ray TCS
2.0 - (0.9x2.2) - 2.0 mm
Oquo Wheel bags, tubeless valves, sealant
We reserve the right to make changes to the product and component information appearing on this site at any time without notice, including with respect to equipment, specifications, models, colors, and materials.